(208) 543-8000  

JASPER 3 YEAR/100,000 MILE WARRANTY

JASPER can offer this beefy warranty on our remanufactured automatic and standard transmissions because every one of them goes through our extensive "Do It Right" process that ensures worry-free operation.  Our shop chooses JASPER because our customers deserve not only the best product and service we can provide but also the peace of mind that comes with high quality - dependable products like JASPER transmissions, engines, and differentials.  

Each transmission is in exceptional working order to factory specifications and has gone through rigorous testing which is why that warranty is so easy to stand behind for JASPER Engines & Transmissions.  Each transmission goes through these steps before being shipped out!
 

THOROUGH CLEANING

Every JASPER reman transmission is thoroughly disassembled then cleaned to remove contaminants that result in premature wear to gears, bearings, shafts and other precision components like the valve body. Transmission cleaning includes individual component hand washing. Parts are carefully inspected and bushing surfaces are polished to a micro finish for extended bushing life.

EXACT TOLERANCES

As transmission technology advances, the need to maintain exacting tolerances becomes increasingly important. JASPER’s thorough inspection and precise machining processes are critical to assure proper operating pressures and provide for a long service life from your JASPER Remanufactured Transmission. Examples of JASPER’s machining processes include:

  • Case and valve body resurfacing along with profilometer inspection of shaft finish that enables JASPER to maintain exact standards and precise tolerances in all phases of transmission remanufacturing.
  • The front pump and gears are carefully gauged and, if exact tolerances are not met, machined to assure they meet our high standards and precise operation.
  • Updates to specific transmissions such as the 5R110 for which JASPER installs a machine-in-place bushing in the pump housing to provide correct alignment between the pump housing and converter hub.​

TORQUE CONVERTERS

Torque converters are cut open to allow for a thorough cleaning, accurate inspection, and the replacement of washers, spacers, springs, rollers, and a new or re-lined lock-up clutch piston as applicable. Turbine fins are inspected and retightened and welded on specific applications. Hubs are carefully inspected and replaced. Converters are pressure tested then dynamically balanced to eliminate vibration that could cause noise, leaks, or transmission damage.

VALVE BODIES

Valve bodies are disassembled, cleaned, and remanufactured by skilled technicians. All components of the valve body are inspected for wear and the valve body is resurfaced for correct mating and sealing with the transmission case.

VALVE BODY TESTING

Valve bodies are tested on an Answermatic test unit which simulates actual vehicle operation. Vehicle speed and driver demand are varied hydraulically. The Answermatic quickly locates cracks and imperfections and verifies accurate shift points.

TRANSMISSION PRE-INSPECTION

Transmission performance is pre-inspected at the assembly station to assure correct operation before additional assembly and testing is performed. Pressurized fluid and special fixtures are used to test circuit leakage.

NEW PARTS

JASPER remanufactured transmissions receive a standard set of new and qualified parts. Our standard parts replacement assures smooth, consistent performance and long unit life. JASPER remanufactured transmissions are assembled by skilled technicians many of whom are ASE Certified and who specialize in particular models or families.

DYNAMOMETER TESTING

Every JASPER domestic automatic reman transmission is dynamometer tested with recorded inspections to shift patterns and shift pressures. A stall test, fluid leak test, lockup test (as applicable), and park test are performed. Tests are made at varying RPM's and at full and closed throttle positions. Standard transmissions are tested at the work station for proper gear engagement as well as for gear and bearing noise and proper engagement of the shift rails into the detents.

QUALITY CONTROL

Consistent quality is maintained through a continuous training program of ASE technicians backed with statistical process control. Technicians are also JASPER Certified for specific transmissions and job functions. Weekly disassembly of a production transmission is also performed. All areas of the transmission are scrutinized for cleanliness, surface finish quality, lubrication, clearance, and wear patterns.

WARRANTY - NATIONWIDE 3 YEAR | 100,000 MILE PARTS & LABOR

Install JASPER with confidence. Every JASPER remanufactured transmission is backed by a nationwide warranty. Transmissions for passenger cars and trucks receive 3 years/100,000-mile parts and labor coverage. A technical hotline (1-800-827-7455) and 24 hour 7-day emergency warranty information are also available.

Talk to our shop about a JASPER transmission solution for your car, truck, SUV, or minivan.  We also offer fleet solutions and custom options.  Drive Safe!

_________________

Thank you for visiting Cowden's Automotive & Exhaust in Buhl, ID. Count on our automotive repair technicians to keep your car, truck, suv, or van on the roads longer and safer.

Schedule your appointment today BOOK NOW   |   CALL: (208) 543-8000

  • Jasper
  • 247towing
  • 24-Hour Dropoff
  • ASE
  • BG Products
  • Bully Dog
  • Cummins Diesel
  • Customer Savings
  • Diamond Eye Performance Exhaust
  • Duramax Diesel
  • Fleet Services
  • Flowmaster
  • Ford Power Stroke Diesel
  • Magnaflow
  • MACS
  • Motorcraft Parts
  • NAPA AutoCare Center
  • Synchrony
  • 24 Month Warranty
  • Wifi Available

© Program, Brand & Specialty Pages, News Blog Content, Page Layout, and CMR EasyNews Programming by CMR, Inc a JSP Website or Top Auto Website

24-Hr Drop Form   |   ADA Accessibility   |   Job Application   |   Privacy Policy   |   Sitemap

ADD ARTICLE   |   LIS